Hi,
I just installed NEMS Linux 4.14.44-07+ on a RasPi B+ with 16GB SD card. nems-init is linked to an empty (0 byte) init.sh; index.php is 0 bytes; the graphical login goes to a blank/black screen, then back to login. I followed the installation instructions, including using Etcher for setting up the SD card. The pi is running, but no NEMS as far as I can tell. Any thoughts?
Thanks,
Bayard
Inactive installation
- Robbie Ferguson
- Posting Freak
- Posts: 835
- Joined: Wed Mar 07, 2012 3:23 pm
- Location: Ontario, Canada
- Contact:
RE: Inactive installation
Sounds like you have a corrupt img file. Can you please try re-downloading it and check the checksum, then burn it again?
What you're describing is some kind of corruption; not normal behavior. :)
Let me know.
Thanks,
Robbie
What you're describing is some kind of corruption; not normal behavior. :)
Let me know.
Thanks,
Robbie
Robbie Ferguson // The Bald Nerd
Did I help you out? Appreciate what I do? Please consider saying thanks:
Did I help you out? Appreciate what I do? Please consider saying thanks:
- Throw something in the tip jar: https://donate.category5.tv
- Support Category5 TV on Patreon: https://patreon.com/category5
- Support NEMS Linux on Patreon: https://patreon.com/nems
RE: Inactive installation
New download fixed it, up and running. Thanks! SHould have caught it from the md5.
- Robbie Ferguson
- Posting Freak
- Posts: 835
- Joined: Wed Mar 07, 2012 3:23 pm
- Location: Ontario, Canada
- Contact:
RE: Inactive installation
Glad you're up and running! I truly hope you enjoy using NEMS!
Robbie Ferguson // The Bald Nerd
Did I help you out? Appreciate what I do? Please consider saying thanks:
Did I help you out? Appreciate what I do? Please consider saying thanks:
- Throw something in the tip jar: https://donate.category5.tv
- Support Category5 TV on Patreon: https://patreon.com/category5
- Support NEMS Linux on Patreon: https://patreon.com/nems