Inactive installation

Found something amiss in NEMS? Confirm first that you are running the latest version, and then post your bug report here.
Post Reply
bayardk
Junior Member
Posts: 2
Joined: Thu Oct 18, 2018 3:59 pm

Inactive installation

Post by bayardk »

Hi,
I just installed NEMS Linux 4.14.44-07+ on a RasPi B+ with 16GB SD card. nems-init is linked to an empty (0 byte) init.sh; index.php is 0 bytes; the graphical login goes to a blank/black screen, then back to login. I followed the installation instructions, including using Etcher for setting up the SD card. The pi is running, but no NEMS as far as I can tell. Any thoughts?
Thanks,
Bayard
User avatar
Robbie Ferguson
Posting Freak
Posts: 835
Joined: Wed Mar 07, 2012 3:23 pm
Location: Ontario, Canada
Contact:

RE: Inactive installation

Post by Robbie Ferguson »

Sounds like you have a corrupt img file. Can you please try re-downloading it and check the checksum, then burn it again?

What you're describing is some kind of corruption; not normal behavior. :)

Let me know.

Thanks,
Robbie
Robbie Ferguson // The Bald Nerd

Did I help you out? Appreciate what I do? Please consider saying thanks:
bayardk
Junior Member
Posts: 2
Joined: Thu Oct 18, 2018 3:59 pm

RE: Inactive installation

Post by bayardk »

New download fixed it, up and running. Thanks! SHould have caught it from the md5.
User avatar
Robbie Ferguson
Posting Freak
Posts: 835
Joined: Wed Mar 07, 2012 3:23 pm
Location: Ontario, Canada
Contact:

RE: Inactive installation

Post by Robbie Ferguson »

Glad you're up and running! I truly hope you enjoy using NEMS!
Robbie Ferguson // The Bald Nerd

Did I help you out? Appreciate what I do? Please consider saying thanks:
Post Reply