problems running nems commands
problems running nems commands
i seem to be running into an issue when going through the install process.
everything is great up until i need to do a <sudo nems-mailtest <email>> or <sudo nems-upgrade> etc.
i just get a "command not found" error.
any suggestions?
thanks in advance.
everything is great up until i need to do a <sudo nems-mailtest <email>> or <sudo nems-upgrade> etc.
i just get a "command not found" error.
any suggestions?
thanks in advance.
- Robbie Ferguson
- Posting Freak
- Posts: 835
- Joined: Wed Mar 07, 2012 3:23 pm
- Location: Ontario, Canada
- Contact:
RE: problems running nems commands
Is that what you're typing into the terminal verbatim?
The correct commands would be:
sudo nems-mailtest [email protected]
Where [email protected] is the recipient.
And to upgrade NEMS, it's:
sudo nems-upgrade
If you are typing the commands correctly, try running this command first: sudo nems-update
What version of NEMS are you running (you'll see this on the screen when you first connect to SSH)?
Good luck. Let me know if that helps.
The correct commands would be:
sudo nems-mailtest [email protected]
Where [email protected] is the recipient.
And to upgrade NEMS, it's:
sudo nems-upgrade
If you are typing the commands correctly, try running this command first: sudo nems-update
What version of NEMS are you running (you'll see this on the screen when you first connect to SSH)?
Good luck. Let me know if that helps.
Robbie Ferguson // The Bald Nerd
Did I help you out? Appreciate what I do? Please consider saying thanks:
Did I help you out? Appreciate what I do? Please consider saying thanks:
- Throw something in the tip jar: https://donate.category5.tv
- Support Category5 TV on Patreon: https://patreon.com/category5
- Support NEMS Linux on Patreon: https://patreon.com/nems
RE: problems running nems commands
sorry, yes that's exactly the same thing that i've typed and i get the command not found error.
i also tried <sudo nems-update> and got the same thing "command not found".
i'm running version 1.2.1
i also tried <sudo nems-update> and got the same thing "command not found".
i'm running version 1.2.1
RE: problems running nems commands
the exact error is "sudo: nems-update: command not found"
- Robbie Ferguson
- Posting Freak
- Posts: 835
- Joined: Wed Mar 07, 2012 3:23 pm
- Location: Ontario, Canada
- Contact:
RE: problems running nems commands
Can you kindly paste me the entire terminal output, including what you type, and the error in its entirety? I also would like to know the output of the command: hostname
Thanks,
Robbie
Thanks,
Robbie
Robbie Ferguson // The Bald Nerd
Did I help you out? Appreciate what I do? Please consider saying thanks:
Did I help you out? Appreciate what I do? Please consider saying thanks:
- Throw something in the tip jar: https://donate.category5.tv
- Support Category5 TV on Patreon: https://patreon.com/category5
- Support NEMS Linux on Patreon: https://patreon.com/nems
RE: problems running nems commands
login as: pi
[email protected]'s password:
Linux NEMS 4.9.28-v7+ #999 SMP Tue May 16 14:03:19 BST 2017 armv7l
Last login: Thu Sep 14 23:54:01 2017 from 192.168.0.243
\ | __| \ | __|
. | _| |\/ | \__ \
_|\_| ___| _| _| ____/
BY: ROBBIE FERGUSON
BALDNERD.COM/NEMS
NEMS Version.....: 1.2.1 (Current Version is 1.2.3)
NEMS IP Address..: 192.168.0.216
Last Login.......: Sat Sep 16 15:41:51 from 192.168.0.243
Uptime...........: 0days 0hours 0minutes 38seconds
Load.............: 1.82 (1minute) 0.51 (5minutes) 0.17 (15minutes)
Memory MB........: 970 Used: 154 Free: 593 Free Cached: 99 Swap In Use:
Disk Usage.......: You're using 2MB in /home/pi
SSH Logins.......: 1 user logged in
Processes........: 152 total running of which 6 are yours
pi@NEMS:~ $ sudo nems-update
sudo: nems-update: command not found
pi@NEMS:~ $ hostname
NEMS
[email protected]'s password:
Linux NEMS 4.9.28-v7+ #999 SMP Tue May 16 14:03:19 BST 2017 armv7l
Last login: Thu Sep 14 23:54:01 2017 from 192.168.0.243
\ | __| \ | __|
. | _| |\/ | \__ \
_|\_| ___| _| _| ____/
BY: ROBBIE FERGUSON
BALDNERD.COM/NEMS
NEMS Version.....: 1.2.1 (Current Version is 1.2.3)
NEMS IP Address..: 192.168.0.216
Last Login.......: Sat Sep 16 15:41:51 from 192.168.0.243
Uptime...........: 0days 0hours 0minutes 38seconds
Load.............: 1.82 (1minute) 0.51 (5minutes) 0.17 (15minutes)
Memory MB........: 970 Used: 154 Free: 593 Free Cached: 99 Swap In Use:
Disk Usage.......: You're using 2MB in /home/pi
SSH Logins.......: 1 user logged in
Processes........: 152 total running of which 6 are yours
pi@NEMS:~ $ sudo nems-update
sudo: nems-update: command not found
pi@NEMS:~ $ hostname
NEMS
- Robbie Ferguson
- Posting Freak
- Posts: 835
- Joined: Wed Mar 07, 2012 3:23 pm
- Location: Ontario, Canada
- Contact:
RE: problems running nems commands
Thanks.
Can you type: sudo reboot
And then try the same commands?
Also, please confirm the NEMS server has Internet connectivity, yes? Eg., ping google.com
Can you type: sudo reboot
And then try the same commands?
Also, please confirm the NEMS server has Internet connectivity, yes? Eg., ping google.com
Robbie Ferguson // The Bald Nerd
Did I help you out? Appreciate what I do? Please consider saying thanks:
Did I help you out? Appreciate what I do? Please consider saying thanks:
- Throw something in the tip jar: https://donate.category5.tv
- Support Category5 TV on Patreon: https://patreon.com/category5
- Support NEMS Linux on Patreon: https://patreon.com/nems
RE: problems running nems commands
Code: Select all
sudo reboot
logged back in via putty
login as: pi
[email protected]'s password:
Linux NEMS 4.9.28-v7+ #999 SMP Tue May 16 14:03:19 BST 2017 armv7l
Last login: Sat Sep 16 18:42:16 2017 from 192.168.0.243
\ | __| \ | __|
. | _| |\/ | \__ \
_|\_| ___| _| _| ____/
BY: ROBBIE FERGUSON
BALDNERD.COM/NEMS
NEMS Version.....: 1.2.1 (Current Version is 1.2.3)
NEMS IP Address..: 192.168.0.216
Last Login.......: Sat Sep 16 18:44:00 from 192.168.0.243
Uptime...........: 0days 0hours 1minutes 24seconds
Load.............: 1.04 (1minute) 0.45 (5minutes) 0.17 (15minutes)
Memory MB........: 970 Used: 178 Free: 547 Free Cached: 99 Swap In Use:
Disk Usage.......: You're using 2MB in /home/pi
SSH Logins.......: 1 user logged in
Processes........: 145 total running of which 6 are yours
pi@NEMS:~ $ sudo nems-update
sudo: nems-update: command not found
pi@NEMS:~ $ ping google.com
PING google.com(lax02s23-in-x0e.1e100.net (2607:f8b0:4007:80b::200e)) 56 data bytes
64 bytes from lax02s23-in-x0e.1e100.net (2607:f8b0:4007:80b::200e): icmp_seq=1 ttl=55 time=29.5 ms
64 bytes from lax02s23-in-x0e.1e100.net (2607:f8b0:4007:80b::200e): icmp_seq=2 ttl=55 time=28.0 ms
64 bytes from lax02s23-in-x0e.1e100.net (2607:f8b0:4007:80b::200e): icmp_seq=3 ttl=55 time=29.9 ms
64 bytes from lax02s23-in-x0e.1e100.net (2607:f8b0:4007:80b::200e): icmp_seq=4 ttl=55 time=24.5 ms
64 bytes from lax02s23-in-x0e.1e100.net (2607:f8b0:4007:80b::200e): icmp_seq=5 ttl=55 time=30.3 ms
64 bytes from lax02s23-in-x0e.1e100.net (2607:f8b0:4007:80b::200e): icmp_seq=6 ttl=55 time=35.2 ms
^Z
[1]+ Stopped ping google.com
pi@NEMS:~ $ ping yahoo.com
PING yahoo.com(ir1.fp.vip.bf1.yahoo.com (2001:4998:58:c02::a9)) 56 data bytes
64 bytes from ir1.fp.vip.bf1.yahoo.com (2001:4998:58:c02::a9): icmp_seq=1 ttl=53 time=90.2 ms
64 bytes from ir1.fp.vip.bf1.yahoo.com (2001:4998:58:c02::a9): icmp_seq=2 ttl=53 time=96.8 ms
64 bytes from ir1.fp.vip.bf1.yahoo.com (2001:4998:58:c02::a9): icmp_seq=3 ttl=53 time=95.8 ms
^X64 bytes from ir1.fp.vip.bf1.yahoo.com (2001:4998:58:c02::a9): icmp_seq=4 ttl=53 time=91.9 ms
64 bytes from ir1.fp.vip.bf1.yahoo.com (2001:4998:58:c02::a9): icmp_seq=5 ttl=53 time=138 ms
64 bytes from ir1.fp.vip.bf1.yahoo.com (2001:4998:58:c02::a9): icmp_seq=6 ttl=53 time=93.0 ms
64 bytes from ir1.fp.vip.bf1.yahoo.com (2001:4998:58:c02::a9): icmp_seq=7 ttl=53 time=91.2 ms
^Z
[2]+ Stopped
- Robbie Ferguson
- Posting Freak
- Posts: 835
- Joined: Wed Mar 07, 2012 3:23 pm
- Location: Ontario, Canada
- Contact:
RE: problems running nems commands
How strange. I am starting to wonder if you got a bad/corrupted image ... but strange it'd react this way even if that was the case.
Try running the update script directly as follows:
Work?
Very curious as to why your deployment is having this issue... a bad image, or something. If I can SSH in, please email me. I wouldn't mind having a look to see if I can spot why this is happening to you (definitely not normal)!
Do you still have your img download? Can you check the MD5 checksum to see if it matches what it should be?
Thanks,
Robbie
Try running the update script directly as follows:
Code: Select all
sudo /home/pi/nems-scripts/update.sh
Very curious as to why your deployment is having this issue... a bad image, or something. If I can SSH in, please email me. I wouldn't mind having a look to see if I can spot why this is happening to you (definitely not normal)!
Do you still have your img download? Can you check the MD5 checksum to see if it matches what it should be?
Thanks,
Robbie
Robbie Ferguson // The Bald Nerd
Did I help you out? Appreciate what I do? Please consider saying thanks:
Did I help you out? Appreciate what I do? Please consider saying thanks:
- Throw something in the tip jar: https://donate.category5.tv
- Support Category5 TV on Patreon: https://patreon.com/category5
- Support NEMS Linux on Patreon: https://patreon.com/nems
RE: problems running nems commands
md5 checks out ok
i've wiped and reburned it a few times before contacting you and always the same results.
i'm on windows and using etcher, but i'm pretty sure that's not the issue since the md5 checks out ok.
i'll pm you with connection info
i've wiped and reburned it a few times before contacting you and always the same results.
i'm on windows and using etcher, but i'm pretty sure that's not the issue since the md5 checks out ok.
i'll pm you with connection info