NEMS Upgrade 1.5 to 1.5.1
-
- Member
- Posts: 89
- Joined: Sun Mar 18, 2018 12:02 am
NEMS Upgrade 1.5 to 1.5.1
Hi Robby,
How are you?
Yesterday I ran the nems-upgrade to move my NEMS from 1.5 to 1.5.1.
As there was a lot to do I set up a terminal and let it run while doing something else....
Sometime later I came back and it was asking for a reboot.
Reboot successful!
However the NEMS main screen is stall telling me I am at 1.5
NEMS Platform....: Raspberry Pi 3 B+
NEMS Version.....: 1.5 (Current Version is 1.5.1)
NEMS IP Address..: 192.168.0.xxx
Uptime...........: 0 days 13 hours 59 minutes 1 seconds
Load.............: 0.20 (1 minute) 0.15 (5 minutes) 0.17 (15 minutes)
0.22 (1 week)
Memory...........: Total: 927 MB / Cached: 89 MB
Used: 243 MB / Free: 126 MB
Disk Usage.......: You're using 28% of your root filesystem
Thinking that I may have missed something while not watching the terminal screen, this morning a reran the Nems upgrade
Below is the reply
sudo nems-upgrade
[sudo] password for xxxxxxx:
Running NEMS 1.5
Please wait for apt tasks to complete...
Done.
There are no rolling upgrades to install.
So it seems that all worked but the system seems to think it's 1.5 not 1.5.1
PS I have put the xxxx on the user names and IP address
Have I done something stupid??
Cheers
Ron T
7/10/2019
I just checked NEMS and it's still thinks it's 1.5
Can someone enlighten me as to why?
RT
How are you?
Yesterday I ran the nems-upgrade to move my NEMS from 1.5 to 1.5.1.
As there was a lot to do I set up a terminal and let it run while doing something else....
Sometime later I came back and it was asking for a reboot.
Reboot successful!
However the NEMS main screen is stall telling me I am at 1.5
NEMS Platform....: Raspberry Pi 3 B+
NEMS Version.....: 1.5 (Current Version is 1.5.1)
NEMS IP Address..: 192.168.0.xxx
Uptime...........: 0 days 13 hours 59 minutes 1 seconds
Load.............: 0.20 (1 minute) 0.15 (5 minutes) 0.17 (15 minutes)
0.22 (1 week)
Memory...........: Total: 927 MB / Cached: 89 MB
Used: 243 MB / Free: 126 MB
Disk Usage.......: You're using 28% of your root filesystem
Thinking that I may have missed something while not watching the terminal screen, this morning a reran the Nems upgrade
Below is the reply
sudo nems-upgrade
[sudo] password for xxxxxxx:
Running NEMS 1.5
Please wait for apt tasks to complete...
Done.
There are no rolling upgrades to install.
So it seems that all worked but the system seems to think it's 1.5 not 1.5.1
PS I have put the xxxx on the user names and IP address
Have I done something stupid??
Cheers
Ron T
7/10/2019
I just checked NEMS and it's still thinks it's 1.5
Can someone enlighten me as to why?
RT
Last edited by ronjohntaylor on Sun Oct 06, 2019 3:54 pm, edited 1 time in total.
RE: NEMS Upgrade 1.5 to 1.5.1
I´ve got the same problem.
NEMS Platform....: Raspberry Pi 3
NEMS Version.....: 1.5 (Current Version is 1.5.1)
nems:~ $ sudo nems-upgrade
Running NEMS 1.5
Please wait for apt tasks to complete...
Done.
There are no rolling upgrades to install.
So what shall we do?
NEMS Platform....: Raspberry Pi 3
NEMS Version.....: 1.5 (Current Version is 1.5.1)
nems:~ $ sudo nems-upgrade
Running NEMS 1.5
Please wait for apt tasks to complete...
Done.
There are no rolling upgrades to install.
So what shall we do?
RE: NEMS Upgrade 1.5 to 1.5.1
Same problem here, Raspberry Pi 3
-
- Member
- Posts: 89
- Joined: Sun Mar 18, 2018 12:02 am
RE: NEMS Upgrade 1.5 to 1.5.1
looks like Robbie has gone on holiday?
An acknowledgement of some sort would be appreciated.
An acknowledgement of some sort would be appreciated.
RE: NEMS Upgrade 1.5 to 1.5.1
Following --
Same problem here. Login screen says I'm at 1.5 and 1.5.1 is available.
In the GUI it announces 1.5.1 as available.
Running nems-upgrade says there are no upgrades available.
Same problem here. Login screen says I'm at 1.5 and 1.5.1 is available.
In the GUI it announces 1.5.1 as available.
Running nems-upgrade says there are no upgrades available.
RE: NEMS Upgrade 1.5 to 1.5.1
So, since this has been languishing...I started looking into some things...
I noticed that I hadn't rebooted since the 1.5.1 upgrade was released. So, I rebooted NEMS.
After coming back up I ran nems-upgrade and it looked like it was upgrading, it wasn't...
Same issue still.
I then ran apt-get update && apt-get upgrade
Several reboots, re-runs of nems-upgrade, no dice...
Same issue still.
I noticed that I hadn't rebooted since the 1.5.1 upgrade was released. So, I rebooted NEMS.
After coming back up I ran nems-upgrade and it looked like it was upgrading, it wasn't...
Same issue still.
I then ran apt-get update && apt-get upgrade
Several reboots, re-runs of nems-upgrade, no dice...
Same issue still.
RE: NEMS Upgrade 1.5 to 1.5.1
Same issue here, as a new user to nagios and nems this made me really confuse
RE: NEMS Upgrade 1.5 to 1.5.1
Hello,
i have the same problem:
Has anyone a solution?
Are the developers aware of this problem?
i have the same problem:
Code: Select all
NEMS Platform....: Raspberry Pi 3 B+
NEMS Version.....: 1.5 (Current Version is 1.5.1)
NEMS IP Address..: xxx.xxx.xxx.xxx
Uptime...........: 1 days 17 hours 12 minutes 48 seconds
Load.............: 0.89 (1 minute) 0.63 (5 minutes) 0.42 (15 minutes)
0.29 (1 week)
Memory...........: Total: 926 MB / Cached: 0 MB
Used: 256 MB / Free: 87 MB
Disk Usage.......: You're using 41% of your root filesystem
Code: Select all
Running NEMS 1.5
Please wait for apt tasks to complete...
Done.
There are no rolling upgrades to install.
Has anyone a solution?
Are the developers aware of this problem?
RE: NEMS Upgrade 1.5 to 1.5.1
This forum seems to be dead, is there an active NEMS-Forum anywhere?
-
- Member
- Posts: 89
- Joined: Sun Mar 18, 2018 12:02 am
RE: NEMS Upgrade 1.5 to 1.5.1
I am so disappointed in the demise of this forum. It was really well runs once upon a time :-(