Use SNMP and MRTG to sample router traffic

Having issues? Post them here, and help other users.
Post Reply
[email protected]
Junior Member
Posts: 3
Joined: Thu Sep 17, 2020 4:27 pm

Use SNMP and MRTG to sample router traffic

Post by [email protected] »

I have been fighting my NEMS and Router for a day trying to get NEMS to read the router's interfaces. Finally foung this article https://docs.nemslinux.com/usage/mrtg?s[]=snmp but the info is only partially correct. I did run mrtgsetup and got a nice output like this:

Enabling MRTG...

You can access the index at https://nems.local/mrtg/

Here are the generated pages:
- https://nems.local/mrtg/192.168.0.12_2.html
- https://nems.local/mrtg/192.168.0.12_3.html

You may now configure check_mrtstraf_nems in NEMS NConf for 192.168.0.12

Imagine my surprise to find there IS not check_mrtstraf_nems choice in the service listing.

Any help will be greatly approeciated.
Post Reply