Port 8080 instead of 80

Post by **edembskey** » Wed Jul 18, 2018 10:31 am

How do I create a new service to check http 8080 instead of 80? I've looked at nconf but superficially I do not see a place to change from port 80 to 8080.

Post by **Robbie Ferguson** » Wed Jul 18, 2018 12:43 pm

Hi edembskey. Are you running a brand new install, or are you operating on a restored backup from NEMS Migrator?

Post by **edembskey** » Wed Jul 18, 2018 12:55 pm

It's a brand new(ish) install.

Post by **Robbie Ferguson** » Fri Jul 20, 2018 8:36 am

In NEMS NConf:

Services->Add
Give it a friendly name...
Choose the Check Command "check_tcp"...
Set the notification period to 24/7...
Set your intervals and notification settings as normal...
Set ARG1 to 8080
Hit submit.

Then go generate your config and if you set your intervals correctly, all should be a-okay. If not, expand the error message to see where you went wrong.

Enjoy!

Post by **Robbie Ferguson** » Mon Jul 23, 2018 2:01 pm

Just a note that I have begun working on this end of the documentation, and the docs for what you need are here: https://docs.nemslinux.com/config/nems_ ... /check_tcp

Post by **edembskey** » Thu Jul 26, 2018 9:47 am

Fantastic! Thank you. I am working on this now.

Post by **edembskey** » Thu Jul 26, 2018 10:03 am

Thanks! Problem solved.

Post by **Robbie Ferguson** » Thu Jul 26, 2018 1:10 pm

Great! Glad to help. Enjoy NEMS!

NEMS Linux Community Forum

Port 8080 instead of 80

Port 8080 instead of 80

RE: Port 8080 instead of 80

RE: Port 8080 instead of 80

RE: Port 8080 instead of 80

RE: Port 8080 instead of 80

RE: Port 8080 instead of 80

RE: Port 8080 instead of 80

RE: Port 8080 instead of 80