Okay thanks for confirming. Hold on to your backup.nems file, and if you can hang tight on 1.5.1 for the moment, I'll determine what's going on and issue an update.
Cheers,
Robbie
Failed to get host-alive check for host
- Robbie Ferguson
- Posting Freak
- Posts: 835
- Joined: Wed Mar 07, 2012 3:23 pm
- Location: Ontario, Canada
- Contact:
Re: Failed to get host-alive check for host
Hi Robbie,
okay, thanks for the quick answer.
I have on my "productive" NEMS still 1-5-1 running.
1-5-2 is only on my dev-Pi.
If you want, I can give you further informations.
Juergen
okay, thanks for the quick answer.
I have on my "productive" NEMS still 1-5-1 running.
1-5-2 is only on my dev-Pi.
If you want, I can give you further informations.
Juergen
- Robbie Ferguson
- Posting Freak
- Posts: 835
- Joined: Wed Mar 07, 2012 3:23 pm
- Location: Ontario, Canada
- Contact:
Re: Failed to get host-alive check for host
Thank you so much. I am however aware of the NEMS MIgrator issue now with 1.5.2, and am actively working on a fix. Watch the site for Build 2, at which point you can run a sudo nems-quickfix on your dev unit to get the patch.
It's a doozie of a problem. Hoping it won't take too long to fix. Probably a few days.
Cheers,
Robbie // The Bald Nerd
It's a doozie of a problem. Hoping it won't take too long to fix. Probably a few days.
Cheers,
Robbie // The Bald Nerd
Re: Failed to get host-alive check for host
Since I didn't have that many hosts, I ended up reconfiguring everything on 1.5.2. Looking forward to a patch so I won't have to do that after the next update
Re: Failed to get host-alive check for host
Hi,
I have the same issue here. Because my SD card in my RPI with version 1.5 was corrupted i installed the latest version 1.5.2 on a new card and restored the backup file. All seemed to be okay until i added a new host and tried to generate a new Nagios Config. Then i got this error: [ERROR] Failed to get host-alive check for host 'NEMS'. Make sure the host is linked with a host-preset. Aborting.
I do not have a 1.5 nor 1.5.1 image. I only have a backup file of a 1.5 installation.
What is the best way to go now?
Thanks in advance.
Regards, Benny.
I have the same issue here. Because my SD card in my RPI with version 1.5 was corrupted i installed the latest version 1.5.2 on a new card and restored the backup file. All seemed to be okay until i added a new host and tried to generate a new Nagios Config. Then i got this error: [ERROR] Failed to get host-alive check for host 'NEMS'. Make sure the host is linked with a host-preset. Aborting.
I do not have a 1.5 nor 1.5.1 image. I only have a backup file of a 1.5 installation.
What is the best way to go now?
Thanks in advance.
Regards, Benny.
Re: Failed to get host-alive check for host
Hi,
there is actually no patch available to solve it.
I´m waiting for that.
I have still version 1.5.1 running.
If you have not so much devices, you can create them new on the fresh v. 1.5.2
;-)
BR,
Juergen
there is actually no patch available to solve it.
I´m waiting for that.
I have still version 1.5.1 running.
If you have not so much devices, you can create them new on the fresh v. 1.5.2
;-)
BR,
Juergen
Re: Failed to get host-alive check for host
Hi Juergen,
Thanks for your answer. I followed up your advice to newly configure 1.5.2 but now i run into a new issue.
On the NEMS server i see two new checks: Room Humidity and Room Temperature.
Because my RPI does not give this info. How could i disable these checks?
Regards, Benny.
Thanks for your answer. I followed up your advice to newly configure 1.5.2 but now i run into a new issue.
On the NEMS server i see two new checks: Room Humidity and Room Temperature.
Because my RPI does not give this info. How could i disable these checks?
Regards, Benny.
Re: Failed to get host-alive check for host
Hi Benny,
I think, you can exclude the service from the nems-host.
BR,
Juergen
I think, you can exclude the service from the nems-host.
BR,
Juergen
Re: Failed to get host-alive check for host
Hi Robbie,
any news about a patch for the import of the config from 1.5.1 to 1.5.2?
Best Regards,
Juergen
any news about a patch for the import of the config from 1.5.1 to 1.5.2?
Best Regards,
Juergen
Re: Failed to get host-alive check for host
Thank you Juergen. You pointed me in the right direction. Now I managed to remove these two unused services.
Regards, Benny.
Regards, Benny.