Use SNMP and MRTG to sample router traffic
Posted: Fri Sep 18, 2020 5:05 pm
I have been fighting my NEMS and Router for a day trying to get NEMS to read the router's interfaces. Finally foung this article https://docs.nemslinux.com/usage/mrtg?s[]=snmp but the info is only partially correct. I did run mrtgsetup and got a nice output like this:
Enabling MRTG...
You can access the index at https://nems.local/mrtg/
Here are the generated pages:
- https://nems.local/mrtg/192.168.0.12_2.html
- https://nems.local/mrtg/192.168.0.12_3.html
You may now configure check_mrtstraf_nems in NEMS NConf for 192.168.0.12
Imagine my surprise to find there IS not check_mrtstraf_nems choice in the service listing.
Any help will be greatly approeciated.
Enabling MRTG...
You can access the index at https://nems.local/mrtg/
Here are the generated pages:
- https://nems.local/mrtg/192.168.0.12_2.html
- https://nems.local/mrtg/192.168.0.12_3.html
You may now configure check_mrtstraf_nems in NEMS NConf for 192.168.0.12
Imagine my surprise to find there IS not check_mrtstraf_nems choice in the service listing.
Any help will be greatly approeciated.