No rrd directory after clean install of 1.5.2 Build 1 on RPI4
Posted: Mon Sep 27, 2021 12:47 pm
Hi all
I just installed NEMS 1.5.2 Build 1 on a RPI4.
Graphs @ "Nagios Core" gives me "Cannot read rrd directory /var/nagiosgraph/rrd".
Nagiosgraphs (from dashboard/reporting) also give the same error.
The directory does not exist at all.
There is a "/usr/local/nagios/nagiosgraph" dir, with etc and var subdirs.
There seems to be a config error somewhere or maybe there is an installation step missing.
I reinstalled everything from scratch, same problem.
Any ideas?
Thanks!
Esteban
I just installed NEMS 1.5.2 Build 1 on a RPI4.
Graphs @ "Nagios Core" gives me "Cannot read rrd directory /var/nagiosgraph/rrd".
Nagiosgraphs (from dashboard/reporting) also give the same error.
The directory does not exist at all.
There is a "/usr/local/nagios/nagiosgraph" dir, with etc and var subdirs.
Code: Select all
@nems:/usr/local/nagios/nagiosgraph/var $ ls -l
total 4
-rw-rw-r-- 1 www-data root 0 Sep 27 12:19 nagiosgraph-cgi.log
-rw-rw-r-- 1 root root 0 Sep 27 12:19 nagiosgraph.log
drwxr-xr-x 2 nagios nagios 4096 Sep 27 12:19 rrd
@nems:/usr/local/nagios $ grep -r "/var/nagiosgraph/rrd" *
nagiosgraph/etc/nagiosgraph.conf:rrddir = /var/nagiosgraph/rrd
I reinstalled everything from scratch, same problem.
Any ideas?
Thanks!
Esteban